See our help videos or contact UCLEAR Support for assistance. Power OFF state, connect device to PC/MAC with included USB charge/data cable. Hold POWER+UP+DOWN to reset device, then hold POWER until red LED turns off (prepares device for update). Follow on-screen instructions in wizard.

How do I reset my Uclear amp?

See our help videos or contact UCLEAR Support for assistance. Power OFF state, connect device to PC/MAC with included USB charge/data cable. Hold POWER+UP+DOWN to reset device, then hold POWER until red LED turns off (prepares device for update). Follow on-screen instructions in wizard.

How do I pair Uclear motion 6?

UClear DynaMESH

  1. Motion devices ON.
  2. Press and hold ‘Quick Access’ on all devices to be paired for five (5) seconds, LEDs blink Purple.
  3. Verify that all LEDs in the desired grouping are blinking Purple.
  4. Now press ‘Power’ on any Motion device to initiate the actual pairing process; as a unit pairs, their LED goes Green.

How do I pair Uclear intercom?

How do I pair my UCLEAR Digital controller to my phone or device?

  1. Turn your UCLEAR control unit on.
  2. Press the Up and Down buttons on your UCLEAR unit to enable pairing.
  3. You should see your UCLEAR come up on your device as an option and be able to select it on the device. If your device asks for a passcode, it is 0000.

How do I charge my Uclear?

Charge the unit completely after purchase using the supplied USB cable. Plug into power while off and do not power on unit when plugged in. The indicator light will be solid red while charging and will turn blue when the unit is fully charged. Speaker wire should be completely inserted until three ribs are hidden.

How do I connect my amp pro?

Turn on the Phone’s Bluetooth, search and select for your AMP Model in your phone. Set your [Other brand] intercom device in pairing mode. Power on the AMP unit by pressing the power button 10 seconds until LED blinks purple. Pairing is successful when AMP LED blinks blue.

How do I connect my amp to my phone?

Power on the unit. Hold “Up” and “Down”2 seconds until LED alternately blinks Blue and Red. Turn on the Phone’s Bluetooth, search and select for your AMP Model in your phone. Set your [Other brand] intercom device in pairing mode.

How do I connect my subwoofer to my phone?

You place your smartphone on top of the subwoofer with the bottom portion (where the microphone is usually located) facing one of the drivers. The subwoofer will then play a test tone to calibrate your phone.

Can a phone connect to a subwoofer?

By using their iOS and Android app, you can figure out how to get the best sonic performance from their subwoofers. This sophisticated yet simple software can be used to fine-tune their DB Series subwoofers. All of this is done is by linking your phone to the speaker via a Bluetooth connection.

Can you add a subwoofer to a Bluetooth speaker?

Is it possible to connect a subwoofer to a bluetooth speaker? Yes, you can connect your bluetooth subwoofer to a bluetooth speaker. For this to work, the devices must be close to one another. This will ensure an adequate signal and that the speaker and subwoofers will be able to work well together.