Check the paper feed path and ensure there is nothing blocking the feed path. If the feed path is clear and the problem remains, perform the following steps: Ensure that the scanner is connected directly to a working USB port on the computer.

Why is the scanner not pulling paper?

Check the paper feed path and ensure there is nothing blocking the feed path. If the feed path is clear and the problem remains, perform the following steps: Ensure that the scanner is connected directly to a working USB port on the computer.

How do I get my HP printer to Scan from the feeder?

Scanning two-sided documents from the ADF

  1. Slide the Duplex switch located near the ADF to the left. This puts the scanner in Duplex mode.
  2. Open HP Solution Center. Click Start.
  3. Click Scan Document. The HP Scanning dialog box displays.
  4. Click Scan.
  5. After the scan is complete, click Done.

How do I get my HP printer to Scan using the feeder?

The only way to scan from feeder, is to use “Windows Fax and Scan” program at a computer after place document in feeder. In the “New Scan” window, change “source” to “Document Feeder”. Then it will scan from feeder.

Why does my scanner keep jamming?

Have you ever wondered why your scanner worked great when you bought it, but sometime later on you notice that it misfeeds or jams almost every time you try and scan your documents? The reason for this is that the scanner contains consumable parts that are supposed to be replaced on a regular basis.

Why can’t I see any reaction on ADF’s scanner?

So if you can’t see any reaction on ADF’s scanner during power-up and initialization (LED should flash for several times), that’s mean the flat cable is damaged (usually you will get Scanner Error 16 and device will be locked for any feature).

How do I remove the ADF from my HP laptop?

Open ADF, hold it with one hand and remove two hinges from the holes by slightly pushing on the front side of hinges using the end of flat screwdriver, According to HP, the ADF is a part, which should not be disassembled, if device is covered by warranty, otherwise you can try to repair on your own risk

How do I use the document feeder on my printer?

Insert the pages print-side up in the document feeder. Make sure that the top edge of the document goes in first. The document feeder capacity is up to 35 sheets of 75 g/m 2 or 20 lb paper. Adjust the paper width guides inward until they rest against the paper.

How do I scan to a USB flash drive from my printer?

Insert a USB flash drive into the port on the front of the printer. From the touch screen, touch the Scan button. Touch the Scan to USB Drive screen. Touch the Scan button to scan and save the file.