Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain.

What size chain does a pole saw take?

Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain.

How do I know what size chain I need for my chainsaw?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.

Does my electric pole saw need oil?

Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.

Why does chain Keep Coming off pole saw?

If your chain is tensioned too loose, it may release from the guide bar during operation, which would be dangerous. Proper chain tension should be maintained at all times. Keep in mind that as the chain warms during use, the chain will naturally loosen.

How tight should the chain be on a pole saw?

How much tension should be on a pole chainsaw chain? A pole chainsaw should be tightened so that the drive links sit comfortably on the guide bar. But should be loose enough that you can pull the chain a little away from the bar.

Why is my pole saw not cutting?

The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.

Is there a chain replacement for the Harbor Freight saw?

This chain is an exact replacement for the original chain on the Harbor Freight saw. I am not sure why Harbor Freight does not stock this chain replacement but I am glad it can be purchased through Amazon.

What size chain do you use for a pole saw?

__91PX Replacement saw Chain for 9.5″ harbor freight Pole Saw pruner fits 9.5″ (Note- Chicago Electric calls this 9.5″ (bar total length end to end), but Oregon calls it 8-inch for cutting length). This chain is 3/8 low profile .050 gauge and 33 drive links. -Verify drive link count match before ordering.

What is a 91px chainsaw chain?

Oregon’s 91PX saw chain is designed for farmers, homeowners, orchardists, and novice chainsaw users who are looking for a low-vibration, low kickback chainsaw chain. The Chamfer Chisel cutters feature twin cutting corners for excellent cutting performance.

Does LowLow-kickback saw chain meet CSA requirements?

Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3. WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov Free shipping in USA on all items.