What size are b16 Pistons?

Supertech Performance Pistons, 81mm to 84mm Bore Size for the Honda Civic Si B16A Engines.

What size are b16 Pistons?

Supertech Performance Pistons, 81mm to 84mm Bore Size for the Honda Civic Si B16A Engines.

Are Supertech pistons forged?

Supertech Forged Pistons NA/NB 1.8L Supertech Pistons, with this alloy, have withstood up to 42psi of boost, with alcohol, without any problems. A two or three step forging process yields a fine structural grain which are then submitted to several machining steps in state of the art CNC machines.

Where are Supertech pistons made?

Argentina
Supertech pistons are manufactured in Argentina with technology transferred from European manufacturers. All of our pistons are manufactured to ensure the highest durability while recognizing the utmost performance improvements.

How much horsepower does a B18C have?

How Much Hp Does B18c Have? A B18C engine can produce 197 horsepower, 131 lb-ft of torque, and a compression ratio of 11. It is an analog version of JDM B18C, B18C1, which is designed for USDM Acura Integra GSR and has a lower compression ratio of 10, VTEC engagement at 4,400 RPM, 170 HP, and 128 lb-ft of torque.

Is a B18C1 VTEC?

The first B18 engine seen stateside was the B18A1 in the 1990–1993 Acura Integra RS/LS/GS. It was a non-VTEC 1.8L motor that put out 130 hp from 1990–1991, while the 1992–1993 version had a slight increase to 140 hp. The beauty of the 1.8L powerplant, however, was its 121 ft-lbs of torque.

How much horsepower can a stock B16 handle?

300 whp is the normal answer, but i have seen them blow with way less. especially the b16a guys.

Does B16 have VTEC?

B16A (First Generation) Featuring a compression ratio of 10.2:1 and VTEC engagement from 5,500rpm, a redline of 8,000rpm, and an 8,200rpm rev-limiter, this first-generation powerplant was a revolutionary gamechanger at the time.

Is B16 A VTEC?

B16A (First Generation) The first VTEC engine. B16A found in: 1989-1993 Honda Integra XSi. 1989-1991 Honda CRX SiR (EF8)

How much boost can a stock B16 take?

Re: B16 boosted can handle how much on stock internals? 11-14 psi with a good tune should be enough for a stock sleeves.

How much HP can a B18 handle?

The B18 internals can handle 300 horsepower when tuned properly. The weight can be as high as 12 pounds, but make sure the tuning is correct. With that turbo, you should be able to reach 275 with 10 or so psi.

What motor is a B16?

The Honda B16 has appeared in six different forms over the years. The Honda B-series was replaced by the K-series in Civic, Integra, and CR-V applications….