The general convention for determining the correct paddle size is to take the rider’s height and add 9-10 inches. If you’re 5’11” ideally you should get a paddle about 80-81 inches, or 6 feet 8 or 9 inches. This is the recommendation for the average user.

What length should my canoe paddle be?

between 52″ and 60″ long
A straight canoe paddle should be between 52″ and 60″ long. A bent-shaft canoe paddle should be between 48″ in 52″ long because of their shorter and wider blades. The most common canoe paddles are 57″, 60″, and 54″ long. Canoe paddles are usually available in length increments of 3 or 2 inches.

How long should my paddle be?

The general convention for determining the correct paddle size is to take the rider’s height and add 9-10 inches. If you’re 5’11” ideally you should get a paddle about 80-81 inches, or 6 feet 8 or 9 inches. This is the recommendation for the average user.

How do you know what size paddle to get?

Measure Your Body Height Then, compare it to the width of your kayak and find the correct corresponding measurement. If you are 5 feet 5 inches or shorter and your kayak is… 23 inches wide or smaller: Try a paddle that is 210 centimeters long. 24 to 32 inches wide: Try a paddle that is 220 centimeters long.

How do you measure a canoe paddle?

On the water: Sit inside the canoe and measure the vertical distance from your nose to the waterline. This measurement should match the distance from a paddle’s grip to the throat, where the paddle shaft meets the blade.

Do canoes have paddles or oars?

Paddles are used for paddling kayaks, canoes, rafts, and stand-up paddleboards; oars are used for rowing Jon boats, rowboats, sculls, and sweep-oar boats. Paddlers face the way they’re headed; you row with your back turned in the direction of travel.

How do you measure SUP paddle length?

measure the paddle based on having your fist at the same level as your shoulder with the blade under the board and the paddle shaft straight down from your extended arms. You can even go a little shorter than that, with your hand down an inch or so below the level of your shoulder.

How do you measure for a canoe paddle?

How do I choose a canoe paddle?

The General Rule. The general rule is the shortest paddle that allows you to comfortable reach the water is best. In the middle of your stroke, your grip hand should be at the height of your nose. The throat of the paddle (where the blade meets the shaft) should be at the water line.

What is the difference between a bow and stern paddle?

Bow paddlers may often prefer a shorter paddle and stern paddlers a longer one. Bow paddlers sit on the floor and measure from floor to chest. Stern paddlers measure to your collar bone or nose. Bent shaft paddles are sized smaller. Sit on a chair and measure from top of chair to eye level.

What is the stern end of a canoe?

The stern end of a canoe is the rear-most point and area on a canoe. The stern of a canoe helps reduce turbulence as you paddle, so a canoe can more smoothly glide through the water.

How to size a canoe paddle?

The best way to size a canoe paddle would be to try the paddle out in the canoe and on the water you plan to paddle. If you can do that, you’ll get a much more accurate idea of the correct canoe paddle length for you. Measure the distance from your nose to the waterline.

How do you measure for a bow paddle?

Place your elbows at 90 degree angles, arms facing up with hands facing in. Measure the distance between your palms. Bow paddlers may often prefer a shorter paddle and stern paddlers a longer one. Bow paddlers sit on the floor and measure from floor to chest.