What is the common wire on a dimmer switch?

A one way light switch has two terminals which is a common marked as COM or C. The common is for the live wire that supplies the input voltage to the switch. The other terminal is marked as L1 and is the output to the light fixture.

Can I run dimming wires in same conduit?

Power-line carrier communication has several advantages. It can serve as a reliable path for simple on/off signals and, depending on the environment, raise/lower dimming signals; can be run with other line-voltage wiring in the same conduit; enables long runs; and allows multiway applications using travelers.

Are all 0-10V dimmers compatible?

Basically, a 0-10V control applies a voltage between 0 and 10 volts DC to produce a varying intensity level. There are actually two existing 0-10V standards. They are not compatible with each other, so it is essential to understand which type is required.

What are the terminals on a dimmer switch?

Each dimmer module has 3 screw terminals, L1, L2 & C (common). In 1-way lighting circuits each light is controlled by 1 switch.

What are the 3 wires on a dimmer switch?

Single pole switches will have 3 wires: a hot lead wire, a ground wire, and a traveler wire. Older homes may only have a hot lead and a ground wire. If you have less than three wires, stop and call an electrician.

What is the output voltage of a dimmer switch?

When both wires are not touching, the dimming control output will be 10 volts, or 100%. When they are touching, the dimming control output will be 0 volts. 0 volts represents its minimum level, and depending on the driver, the fixture will either go into sleep mode, turn off completely, or utilize a dimmer switch to turn off.

Can you use a 0 10V dimmer switch with LED lights?

Using 0-10v Dimmers with LED Power Supplies 0-10-volt dimmers produce varying light intensities from 10% to 100%. The design of many dimming switches causes the fixtures to continually run (albeit at a low power), even if the dimmer is turned all the way down.

What is a 0-10V dimmer?

What Is a 0-10v Dimmer? 0-10v dimming is a lighting control method that—on direct current voltage (DC) between 0 and 10 volts—can produce varying light intensity levels. This simple lighting control system connects to your LED fixtures to provide multipurpose lighting solutions and ambiance.

What is a dimmer and how does it work?

When a dimmer is used to control its light intensity, it also reduces the power being fed to the LED, resulting in less energy being used. Less energy used equals more money saved, and extended LED lamp life. 0-10v dimming drivers for LEDs allow you to create lighting to suit a mood or activity through a reliable technology.