The IPC/WHMA-A-620 is a quality standard that describes the Requirements and Acceptance for Cable/Wire Harness Assemblies. It was created as a joint project of the Association Connecting Electronics Industries (IPC) and the Wire and Harness Manufacturers Association (WHMA).

What are IPC 620 standards?

The IPC/WHMA-A-620 is a quality standard that describes the Requirements and Acceptance for Cable/Wire Harness Assemblies. It was created as a joint project of the Association Connecting Electronics Industries (IPC) and the Wire and Harness Manufacturers Association (WHMA).

What is IPC A 620 Class 2?

IPC-WHMA-A-620 Class 2 IPC/WHMA-A-620 Class 2 products require continued performance and extended life. Uninterrupted service is desired, but not critical. Class 2 products include communications equipment and other dedicated-service electronic products.

What is the current revision of IPC 620?

The most recent version, called A-620D, was released in January 2020. A Space Addendum was released in September 2020. This latter document ensures the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments, getting to and operating in space.

What is the minimum Imperial English length tolerance allowed when building a cable?

Example: For a cable measuring 4 ½ feet long, the recommended tolerance values are + 2 inches and -0 inches, which means that the cable should never be shorter than 4 ½ feet but may be up to 2 inches longer (4 ft, 8 inches).

What does IPC stand for?

IPC is the official name of the association which produces PCB-related standards. The association was formerly called the Institute for Printed Circuits (hence the acronym “IPC”), but is presently called the Association Connecting Electronics Industries—even though it retains the IPC moniker.

What is the difference between IPC-A-610 and J-STD-001?

For example, IPC-A-610 specifies mandated criteria that should be used daily by board inspectors. The J-STD-001, on the other hand, provides the best practices that process engineers, supervisors and technicians should follow to achieve acceptable boards.

What is IPC-A-610 Class 3?

Class 3 (J-Lead Components) Many of Samtec’s products can meet IPC-A-610 Class 3 which is normally required when a product must have continued high performance in extreme / harsh conditions. Mil / Aero and Medical applications typically require Class 3 products.

What does IPC 610 cover?

IPC-A-610 covers the inspection of the final product, which includes all of the above plus all the other issues related with final assembly, which are not covered in the soldering standard, such as connector, assembly, etc., and it has all the illustrations and pictures which defines the differences between the …

What is IPC-a-610?

IPC A-610, Acceptability of Electronics Assemblies, is the most widely used inspection standard in the electronics industry and has earned an international reputation as the source for end-product acceptance criteria for consumer and high reliability printed circuit assemblies.

What is the latest revision of IPC 610?

IPC Releases New “H” Revision to Two Leading Standards for Electronics Assembly, IPC J-STD-001 and IPC-A-610

  • Section 8 is all new – Cleaning and Residue Requirements.
  • 1.56 µg/NaCI equivalence/cm2 value for resistivity of solvent extract (ROSE) – no longer acceptable basis for qualifying a manufacturing process.

What is IPC A 610 Class 2?

IPC-A-610 Class 2 Class 2 of the IPC standards is typically the most requested for non-critical electronic assemblies where longer-term reliability is desirable, but perhaps not essential. Class 2 does still allow for a certain degree of imperfection.

What is IPC standard?

IPC standards are the electronics-industry-adopted standards for design, PCB manufacturing, and electronic assembly. There’s an IPC standard associated with just about every step of PCB design, production, and assembly (see Figure 1).

What is IPC/WHMA A-620?

What is IPC/WHMA A-620? The IPC/WHMA-A-620, Requirements and Acceptance for Cable/Wire Harness Assemblies is a joint project of IPC (Institute of Printed Circuits) and WHMA (Wire Harness Manufacturers Association). Originally released in 2002, the IPC/WHMA-A-620 has become the industry standard against which to measure quality.

What does A-620 stand for?

The IPC/WHMA-A-620, Requirements and Acceptance for Cable/Wire Harness Assemblies is a joint project of IPC (Institute of Printed Circuits) and WHMA (Wire Harness Manufacturers Association). Originally released in 2002, the IPC/WHMA-A-620 has become the industry standard against which to measure quality. The A-620 describes requirements

How long does it take to get IPC A-620 certification?

The term for an IPC/WHMA-A-620 certification is two years. Instructor certification and re-certification training is conducted primarily at IPC Authorized Training Centers but may be conducted by the training center at company facilities. Purchase A-620 Standard

How long is the IPC/WHMA-A-620 training and certification program?

The IPC/WHMA-A-620 training and certification program has two tiers of instruction. Trainers will participate in a week-long program that has 29 instructional hours. An optional eight hour hands-on course is available.