To Factory Reset an Epson printer: Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port). Turn on the printer while holding the reset button. Wait until a message prints indicating that the printer is resetting.

Is there a reset button on my Epson printer?

To Factory Reset an Epson printer: Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port). Turn on the printer while holding the reset button. Wait until a message prints indicating that the printer is resetting.

How do I reset my Epson reset software?

Carry this out for any Epson programs running. Now to reset your printer. Switch off the printer using the power button. PRESS and HOLD all following printer buttons: Power, Load/Eject, Stop, B&W, Color and continue to hold until “Init eeprom” appears on the printer screen, then RELEASE ALL BUTTONS.

Is there a reset button on Epson ink cartridges?

Find the Cartridge Reset Button. Turn the ink cartridge to where the microchip can be found. Using the end of a paper clip, press the reset button that can be located above the metal contacts, right in the center.

Where is the reset button on Epson ink cartridge?

How do I reset my Epson ET 7700 maintenance box?

This resetter is a hardware solution that we take the maintenance box out and reset the waste ink pad counter on the chip. The procedure is simple: take the maintenance box out and find the chip. Put the chip on this resetter and press down. Hold it for few seconds and the counter will be reset to zero.

How to reset an Epson printer cartridge?

How to Reset an Epson Cartridge Chip 1 Verify that the cartridge chip reset tool you’re using is compatible for use with the model 2 Remove the empty ink cartridge from your Epson printer. 3 Line up the ink cartridge with the marks displayed at the base of the chip reset tool. 4 Press the pins on the reset tool firmly See More….

How do I get more ink out of my Epson printer?

Press the “ink change” button on your printer to prepare the device for printing. Both the black and colored ink cartridges will reflect the same level of ink, and you can get more ink out of the empty cartridge Epson had originally requested that you replace.

How do I reset the ink cartridge to default settings?

Press the pins on the reset tool firmly against the chip contacts on the ink cartridge until the light on the reset tool begins to blink red. This will indicate that the reset tool has recognized and is connected to the ink cartridge.

How do you remove a chip from an EPSON ink cartridge?

Remove both the color and black ink cartridges from your Epson printer. Use a single-sided razor blade to remove any excess plastic from the top post of the ink cartridge that is holding the chip in place. Slide the chip up and out of the ink cartridge.