GCC3106 – Citreon Berlingo Firstly, push the inner cable into the outer cable, again all the way to the stop, until the protruding plastic sleeve engages audibly. Then the adjustment mechanism can be pushed together through the outer cable and therefore reset.

How do you reset the clutch cable on a Citroen Berlingo?

GCC3106 – Citreon Berlingo Firstly, push the inner cable into the outer cable, again all the way to the stop, until the protruding plastic sleeve engages audibly. Then the adjustment mechanism can be pushed together through the outer cable and therefore reset.

How do you install a self-adjusting clutch cable?

On self-adjusting clutch cables, depress the clutch pedal several times. Compress the spring (under the rubber boot) and have a helper remove the securing parts from beneath the clutch release lever. Pull the cable end from the lever. Do not open the automatic adjustment mechanism.

How does a self-adjusting clutch cable work?

The self-adjusting clutch (SAC) uses a load sensor (sensor diaphragm spring) to activate its wear adjustment function by turning a ramp ring. This wear adjusting mechanism reduces the required actuation forces while increasing the service life of the clutch by around 1.5 times.

How do I adjust my clutch?

To adjust, simply pull up on the clutch cable and loosen the locknut and the adjuster nut slightly. Next, slowly pull up on the clutch cable again. You will feel a point where the clutch fork engages. This is where the clutch cable should be adjusted to.

What are the advantages of self adjusting clutch?

Advantage is a self-adjusting clutch, which keeps the clutch in constant adjustment by maintaining bearing release position. Only a self-adjusting clutch should be used when replacing a clutch in a hydraulic release system. Advanced vibration control technology provides exceptional durability and long life.

Warum rutscht die Kupplung beim Citroen Berlingo?

Da mit einem Citroen Berlingo in der Regel auch größere Lasten transportiert werden, macht sich der Verschleiß an der Kupplung eindeutig bemerkbar. Ist das Fahrzeug beladen, gibt es Probleme beim Anfahren. Die Kupplung rutscht dann. Dadurch verzögert sich die Beschleunigung. Der Wagen kommt nur ruckweise in Schwung.

Wie lange dauert der Wechsel eines Kupplungsseils?

Der Wechsel ist relativ schnell erledigt. Ist wirklich nur das Kupplungsseil gerissen, sollte der Austausch nicht viel länger als 30 Minuten dauern. Zu den Material-Kosten kommt also noch die Arbeitszeit hinzu. Je nach Werkstatt sollten Sie hierfür 30 bis 50 Euro einplanen.

Wie viele Getriebe hat ein Citroen Berlingo?

Bei den Citroen Berlingo mit Ottomotoren stehen je nach Motorisierung Schaltgetriebe mit vier oder fünf Gängen zur Verfügung. Die Varianten mit Dieselmotoren sind ausschließlich mit manuellen Fünfganggetrieben erhältlich.

Was ist bei einem Citroen Berlingo zu beachten?

Obwohl bei einem Citroen Berlingo meistens zuerst die Kupplungsscheibe verschleißt, wird nicht nur sie erneuert, sondern auch der Kupplungsdeckel, der mitunter auch Kupplungsglocke genannt wird. Das Ausrücklager wird ebenfalls erneuert.