Move the front cutting-height levers rearward, or toward the back of the mower, and the back cutting-height levers forward, or toward the front of the machine. This will raise the machine and increase the cut-grass length. There are two front cutting-height levers, which are located on the inside of each front wheel.

How do you adjust the height on a Toro?

Move the front cutting-height levers rearward, or toward the back of the mower, and the back cutting-height levers forward, or toward the front of the machine. This will raise the machine and increase the cut-grass length. There are two front cutting-height levers, which are located on the inside of each front wheel.

How do you adjust the height on a Toro Zero Turn mower?

Turn the mowing deck adjustment gear clockwise with the wrench to raise the mowing deck or counterclockwise to lower the deck. Check the left and right cutting blade tip distances to the ground, and rotate the adjustment gear until the left and right cutting blade tip distances to the ground are the same.

How do you adjust the height on a Toro Recycler 22?

Note: To raise the machine, move the front cutting-height levers rearward and the rear cutting-height levers forward. To lower the machine, move the front cutting-height levers forward and the rear cutting-height levers rearward.

How do I lower the Toro mower deck?

Move the cutting height lever on one of the front wheels forward to lower the cutting height at that wheel or backward to raise it. You may have to push or pull the lever slightly in order to slide it into the desired position.

How do you raise the deck on a Toro lawn mower?

The deck will lower as you move the lever toward the front of your mower, and raise as you move the lever in the direction of the push handle at the rear.

How do you level the deck on a Toro Wheel Horse?

Loosen the lower nut, the jam nut, on the adjustment link with a wrench, moving it clockwise to raise the front of mower, and counterclockwise to lower it. Tighten and remeasure. Repeat as necessary until the deck is adjusted properly.

How do I adjust the fuel injector height on a series 60?

Adjust the fuel injector height for the engine models in parentheses by placing the small end of the height gage in the hole provided in the fuel injector body, with the flat of the gage toward the fuel injector plunger. See Figure 12-3. The injector height settings for Series 60 engines are listed in Table 12-2.

Does Toro still make parts for their mowers?

i really use to love this mower till it got up to about 700 hours in for years and i needed a parts for it and toro does not make parts any more. i will be selling all of my mower this spring and never will we own a toro again.

What kind of engine does a Toro Z Master have?

The Z Master 6000 Series is one of Toro’s most advanced zero-turning radius mowers. It’s also one of our most comfortable. This Z Master® 6000 Series mower has a 31 HP (23.12 kw) Kawasaki® FX 999cc Engine with 60″ (152 cm) TURBO FORCE® deck.

How does the Toro ez VAC work?

Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system.