Usually just unplugging the amp and plugging it back in will reset the system and make it work again. The amp is on the left hand side of the trunk behind the cover that pulls off. You may have to unbolt it to unplug it.

How do I unmute myAudi MMI?

Usually just unplugging the amp and plugging it back in will reset the system and make it work again. The amp is on the left hand side of the trunk behind the cover that pulls off. You may have to unbolt it to unplug it.

Why is myAudi MMI not working?

If your MMI doesn’t start up at all, then it’s probably not receiving power. The fuses that control many of the MMI modules are located in a compartment in the left side of your trunk. Pry open the side panel in the trunk and inspect the fuses.

Why is myAudi stuck mute?

This sounds like a MMI control unit issue or radio amplifier issue. The MUTE icon will permanently come up if there is a problem with the sound system.

How do you reset an Audi MMI 2020?

The FIX: Step By Step for the AUDI MMI Forced Reboot (reset)

  1. Turn the car on by pushing the start/stop engine button,
  2. then, move your hand to the right, for the volume control.
  3. and push DOWN On it (the volume control)
  4. Hold it for about 15 seconds (seems like eons)

How do I turn on MMI on my Audi?

To switch on the MMI system, briefly press the ON/OFF button Fig. 2. To switch off the MMI system, press and hold the ON/OFF button until the MMI is switched off.

How do I reset my Audi TT MMI?

Press both left and right buttons on the control forward and then press the centre button.

How do I reset my Audi MMI 2020?

Connected Car Wi-Fi (Audi) – Factory Reset

  1. From the vehicle’s head unit, Select. Menu. .
  2. Settings. .
  3. System maintenance. .
  4. Restore factory settings. .
  5. To Confirm, select. Restore factory settings. .

How do I know if MyAudi needs a software update?

For the most part, you have to take the car into the dealer so they can do the update. In the Service section of my MyAudi app they normally list any software updates you need.

Why is my MMI not working on my Audi?

If standard or Audi then you could have an issue with your MMI units internal amp. Last person I knew who had this needed a new board. If B&O then it could be the same issue or a problem with the external amp (under passenger seat) or the connections between said amp and the MMI unit. #7

Does Audi MMI High/techpack mute navigation plus?

Unfortunately it’s not muted And the upgraded Audi system with the sub not B&O i have the navigation plus system with the 7″ screen So you have MMI High / Techpack with the Audi Sound System (***). Sounds like you might have the same issue that one of my customers did.

Is there a 7 inch MMI speaker system?

I have the Audi speaker system 7 inch MMI tech pack (like @Vincent ) – nothing like the Bose or the B&O options. Parking sensor sound always comes through,

Does MIB1 have a problem with the amplifier?

Some specialist confirmed that MIB1 have knowing problem with amplifier, in my case too. Chips was changed a couple months ago and unit working well all the time. I regret that I didn’t buy mib2 before “retrofitting”. Chips need to be replaced using hot air station, everything need to be done perfect, also the thermal grease should be replaced.