1. Press the “Control Button” around 5 seconds until you hear dual tones followed by a single tone or the blue indicator light on the headset flashes twice (The two flashes are at an interval of 5 seconds). Now the headset is in the pairing mode.

How do I pair my bt100 Bluetooth?

1. Press the “Control Button” around 5 seconds until you hear dual tones followed by a single tone or the blue indicator light on the headset flashes twice (The two flashes are at an interval of 5 seconds). Now the headset is in the pairing mode.

How do I connect my Cambridge Audio to Bluetooth?

To connect to the TVB2 via Bluetooth for the first time, please follow the steps below.

  1. Press the Bluetooth button on the TVB2 remote.
  2. Once ‘BT’ is pulsing, press and hold the Bluetooth button.
  3. You are then able to follow the Bluetooth settings of your chosen device and connect to the bar.

Does Cambridge Audio One have Bluetooth?

A Bluetooth connection is available thanks to the Bluetooth Receiver on the back of the One. This will allow you to stream audio from any phone or tablet to your unit wirelessly. You can find Bluetooth connection instructions on page 11 of the User Manual here.

How do I pair my Maxell EB BT100?

Activate the Bluetooth feature on your phone and search for the headset. Select the headset (example:EB-BT100) from the list of devices found by your phone. Press the power switch button for 3 seconds in shutdown mode,you will hear voice prompt.

How do I connect my Sennheiser Bluetooth audio transmitter?

Pairing the transmitter to the headphones

  1. Set your headphones to pairing mode. If you are using Sennheiser headphones, the headphones’ LED usually flashes blue and red during pairing.
  2. Press the Multifunction button on the transmitter for 4 seconds. The transmitter goes into pairing mode and the LED flashes blue and red.

How do I connect to Cambridge Audio?

Remove the earphones from the case. If audio begins playing through them, pause this by tapping either the Left or Right earphone once. Press and hold either the Left or Right button for two seconds to enter pairing mode. Select either ‘Melomania L // Cambridge’ or ‘Melomania R // Cambridge’.

How do you play Bluetooth on fusion?

FUSION-Link™ app from the Connect IQ™ store onto the watch. 2 On the stereo, select the BT source. 3 Select > DISCOVERABLE. The stereo remains discoverable for two minutes.

How do I pair my Maxell Bluetooth headphones?

Press and hold down the Multi Button for about 3 seconds from the power OFF state. When the power turns ON, the blue indicator light up and, flashes slowly. Enable Bluetooth on your device. The earphone will connect automatically .

How do I pair my Maxell wireless earbuds?

Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the “JELLEEZ-TW” from the list of available Bluetooth devices. If required, enter the password ‘0000’ to confirm & finalize pairing.