A cable rated for 10A at 125V (1250W) is about the same. The rating is used for safety, not a physical maximum. The cable will work fine even if you were using the maximum capacity of your power supply (which is unlikely). If you had a very diligent electrical inspector, they could argue that it’s not correct.

Are all 10A 125V the same?

A cable rated for 10A at 125V (1250W) is about the same. The rating is used for safety, not a physical maximum. The cable will work fine even if you were using the maximum capacity of your power supply (which is unlikely). If you had a very diligent electrical inspector, they could argue that it’s not correct.

What is C13 power cord?

These high quality 3-pin IEC mains power cords are suitable for many types of desktop computers / electrical appliances and are sometimes colloquially referred to as “Kettle leads”.

What is C14 power cord?

IEC C14 to C13 cords are the most popular type of power cord used to power equipment in a data center server rack. Sometimes referred to as Jumper Cords, C14 to C13 cords are used to connect server and network equipment power supplies to a PDU or power strip.

What is NEMA 5 15P?

The NEMA 5-15P is your standard household plug used for to connect small appliances such as TV’s, Microwaves, hairdryers, etc to a wall outlet. The NEMA 5-15P is compatible with a NEMA 5-20R T-Slot outlet, which is commonly found in new home installations.

What is 10A 125V?

The 100′, orange 10A 125V Outdoor Extension Cord from Go Green is a 16/3 gauge SJTW extension cord. This cord is cETLus certified and will support loads up to 1250 Watts.

What is a 10A 125V power cord used for?

The Power Supply Cord RA HOSP Ground 10A 125V 10ft is a power cord that is used to supply power to medical components, medical devices and patient care equipment.

Does IT matter which power cable I use?

If you are referring to the 110 VAC power cord there is no problem as to which cord you use. However, the cables that connect from the PSU to the motherboard, devices, graphics card, etc. are not inter-changeable from one brand to another.

Are C13 and C14 the same?

C13 connectors offered by Interpower are rated at 10A/250VAC international and 15A/250VAC North America with a temperature rating of up to 70°C. C14 inlets are also rated at 10A/250VAC international and 15A/250VAC North America with a temperature rating of up to 70°C.

Does a C14 plug into a C13?

The end that plugs into your server is the C13 connector, while the part that inserts into the PDU is the C14 plug. Our C14 to C13 power cables come in 10, 13 or 15 amps.

Is NEMA 10-30 grounded?

Correct, the 10-30 is wired to neutral, not ground. This is the correct way to wire it.

What is a C7 plug?

The C7 coupler is commonly known as a “figure-8”, “infinity”, or “shotgun” plug, due to its shape. This power cord features 18AWG conductors and is rated for a 125V, 10 amp load.