A modern hand grenade generally consists of an explosive charge (“filler”), a detonator mechanism, an internal striker to trigger the detonator, and a safety lever secured by a linchpin.

What are the parts of a fragmentation hand grenade?

A modern hand grenade generally consists of an explosive charge (“filler”), a detonator mechanism, an internal striker to trigger the detonator, and a safety lever secured by a linchpin.

What are the parts of a grenade?

The three main parts of a grenade are the body, the fuse, and the filler.

What is a mk2 grenade made of?

The original Mk 2 grenade had a 3⁄8-inch (9.5 mm) threaded plug in its base, which covered the opening used to place the explosive filling, either 1.85 oz (52 g) of TNT, 2.33 oz (66 g) of Trojan explosive (a mixture of 40% nitrostarch, ammonium nitrate, and sodium nitrate), 1.85 oz (52 g) of a 50/50 amatol/nitrostarch …

Is it legal to own fragmentation grenades?

Hand grenades are destructive devices that are unlawful to possess unless they are registered under the National Firearms Act. Musso previously argued that the grenades were not destructive devices because the FBI had made their fuses inoperable for safety purposes in the undercover operation.

What is the killing radius of a grenade?

The casualty radius of a grenade is between 5 and 20 meters; with a minimum of 50% of exposed personnel becoming casualties within a radius of around 15 metres from the blast. A single grenade can kill an individual up to 10 metres away and can cause serious injuries up to 20 metres away.

When was the pineapple grenade made?

1918
Two other important grenade designs that emerged from the first war are the German stick grenade, a narrow explosive with sometimes troublesome pull chord that was prone to accidental detonation, and the Mk II “pineapple” grenade, designed for the U.S. military in 1918.

Can you put a pin back in a grenade?

Any article on the discussion of grenade usage would be remiss in not answering the additional question often posed of whether you can put the pin back in after you’ve pulled it and still have it be safe to let go of the lever- the answer is yes, but this must be done VERY carefully, as letting up even a little on the …