To fix this error, go to iSCSI Initiator and delete the reconnecting target from the Favorite Targets tab. After you have done this, follow to the Targets tab, disconnect the reconnecting target manually by pressing the Disconnect button and connect it again.

How do I reconnect to iSCSI?

To fix this error, go to iSCSI Initiator and delete the reconnecting target from the Favorite Targets tab. After you have done this, follow to the Targets tab, disconnect the reconnecting target manually by pressing the Disconnect button and connect it again.

How do I start iSCSI initiator service in Linux?

Procedure

  1. Configure the iSCSI-initiator daemon by editing the /etc/iscsi file. [root@R64SRV6 ~]# cd /etc/iscsi/ [root@R64SRV6 iscsi]# ls initiatorname.iscsi iscsid.conf [root@R64SRV6 iscsi]#
  2. Manage the software by using the chkconfig command and the service command.
  3. Use the default settings for the iSCSI initiator.

How do I reset my iSCSI initiator?

Resetting the cached iSCSI initiator configuration information

  1. Start the configuration utility if it is not already running.
  2. Highlight Configuration Settings using the up or down arrow keys and press Enter.
  3. Highlight Clear persistent targets using the up or down arrow keys and press Enter.

How do I make iSCSI storage persistent in Linux?

Steps to setup iSCSI target

  1. Create the backing storage devices.
  2. Create the IQN and default target portal group (TPG).
  3. Configure one or more ACLs for the TPG.
  4. Create LUNs to provide access to the backing storage devices.
  5. Create a portal to provide a network interface that iSCSI initiators can connect to.

How do I connect iSCSI initiator?

Connect the iSCSI target on Windows

  1. Launch the iSCSI initiator at Control Panel > Tools.
  2. On the iSCSI Initiator Properties page, click Discovery.
  3. Enter the IP address of the NAS and then click OK.
  4. Click Targets and then select the available iSCSI targets that you want to connect.
  5. Click Connect.
  6. Click OK.

How do I start Microsoft iSCSI initiator service?

Procedure

  1. In the Windows Services list, right-click Microsoft iSCSI Initiator Service.
  2. Click Properties.
  3. On the General tab, set the following options: In the Startup type list, select Automatic. Click Start, and then click OK.

How do I get a new iSCSI initiator name in Linux?

iscsi file.

  1. Edit the /etc/iscsi/initiatorname.iscsi file with vi command. For example: twauslbkpoc01:~ # vi /etc/iscsi/initiatorname.iscsi.
  2. Update the InitiatorName= parameter with the initiator name. For example: InitiatorName=iqn.2005-03.org.open-iscsi:3f5058b1d0a0.

How do I start an iSCSI service?

How do I set up iSCSI initiator?

Configure iSCSI Initiator on Windows Server 2019

  1. Step 1: Open Server Manager.
  2. Step 2: Click on Tools and choose “iSCSI Initiator”
  3. Step 3: Key in the IP Address of Target Server.
  4. Step 4: iSCSI Target Discovered.
  5. Step 5: Highlight discovered target and connect.
  6. Step 6: Click Advanced to set advanced settings.

How does iSCSI initiator work?

How iSCSI works. ISCSI works by transporting block-level data between an iSCSI initiator on a server and an iSCSI target on a storage device. The iSCSI protocol encapsulates SCSI commands and assembles the data in packets for the TCP/IP layer. Packets are sent over the network using a point-to-point connection.

How do I enable software iSCSI initiator in vmware?

Configure iSCSI software initiator

  1. Select your ESXi host in the inventory and go to Manage > Storage.
  2. Click OK in the Add Software iSCSI Adapter window that opens:
  3. When the task is completed, select the vmhba adapter that is listed under iSCSI Software Adapter.

How to configure iSCSI initiator in RHEL 7/CentOS 7?

In this article, we are going to see how to configure the iSCSI initiator in RHEL 7 / CentOS 7 and then use that storage to create and mount a file system. This is very simple configuration and requires very fewer steps. You just have to install the iscsi-initiator-utils RPM and then discover the shared storage from the target.

How to fix iSCSI initiator not connecting error?

To fix this error, go to iSCSI Initiator and delete the reconnecting target from the Favorite Targets tab. After you have done this, follow to the Targets tab, disconnect the reconnecting target manually by pressing the Disconnect button and connect it again.

How to fix iSCSI target not reconnecting issue?

To fix this error, go to iSCSI Initiator and delete the reconnecting target from the Favorite Targets tab. After you have done this, follow to the Targets tab, disconnect the reconnecting target manually by pressing the Disconnect button and connect it again. This will help you to eliminate the reconnecting status of your iSCSI targets.

How to configure initiator name on CentOS 8/RHEL 8?

Start by installing iscsi-initiator-utils on CentOS 8 / RHEL 8 machine which will act as initiator. This is done by running the commands below in your terminal. sudo dnf -y install iscsi-initiator-utils Step 2: Configure Initiator Name