With FTTP, you’ll connect to the Ethernet socket on the Openreach ONT, so you just need PPPoE (so basically any router). It also applies to Cityfibre based FTTP if connecting your own router to their ONT.

Does BT FTTP use PPPoE?

With FTTP, you’ll connect to the Ethernet socket on the Openreach ONT, so you just need PPPoE (so basically any router). It also applies to Cityfibre based FTTP if connecting your own router to their ONT.

How do I enable DrayTek bridge mode?

Step 1: Go to Internet Access>>PPPoE/PPPoA configuration menu. Go to Internet Access >> MPoA (RFC1483/2684) configuration menu. Select “Enable” and enter the DSL Modem settings by selecting channel 2 for Multi-PVC Channel Enable Bridge Mode by selecting Enable Bridge Mode check box.

How do I install draytek vigor?

Vigor VDSL2 Routers Access the DrayTek router’s web interface via your web browser, which will be accessible on http://192.168.1.1 by default. Enter the username of “admin” and the default password of “admin”. 2. Browse to [WAN] > [General Setup], click [WAN1] and set the VLAN Tag insertion (VDSL2) setting to Enable.

Do you need a modem with FTTP?

FTTP/C, HFC Service Types In this case, you will simply need an eWAN (Ethernet Wide-Area-Network) WiFi Router (there is no need for a modem component). You can supply and connect your own hardware as long as it isn’t locked to your current or previous internet service provider, and that it is nbn™ compliant.

How do I set a static IP for DrayTek?

Go to the Start Menu > Control Panel > Network Connections > Local Area Connection. Right click, select Properties, go to the Properties for Internet Protocol (TCP/IP) Set the radio buttons to Obtain an IP address automatically and Obtain DNS server address automatically.

Can I use my own router with BT FTTP?

Re: Using own router with FTTP 900? If you want BT’s Digital Voice, then yes, the BT router needs to stay connected as the first device. If you move to a third party VOIP provider then the BT router is not required.

Can I use a 3rd party router with BT?

Re: Using a 3rd party Router BT doesn’t require anything specific at all. You just need an appropriate device for the type of service you have. If you have FTTC, you just need a VDSL modem/ router.

What is the difference between PPPoE and bridge mode?

PPPoE mode requires that your ADSL Modem/Router do three separate things to the Ethernet Frames coming off the ADSL modem. The later two are both computational expensive and completely unnecessary for a single computer to access the internet. In Bridge mode the raw PPPoE frames come off the ADSL modem, zero CPU usage.

What is bridge mode DrayTek?

What does Bridge Mode do on a DrayTek DSL router? When a DrayTek router with integrated DSL modem has its DSL wan set to enable ‘Bridge Mode’, the router instead operates as a modem does, working as a DSL to Ethernet converter and no longer directly utilising the connection.

How do I setup a wireless WAN?

Insert your wireless router’s AC adapter to the DC-IN port and plug it to a power outlet. Use another network cable, connect your modem to your wireless router’s WAN port. Use the bundled network cable, connect your computer to your wireless router’s LAN port.

What router do I need for nbn FTTP?

FTTN/B Service Type If you are in an nbn™ FTTN or FTTB area, you will need an nbn™ Compliant VDSL2 WiFi Modem Router in order for the service to work.

Can I connect my DrayTek router to BT Infinity?

VDSL DrayTek routers with Ethernet WAN interfaces are able to connect to a BT Infinity or other ISPs similar BT FTTC based broadband (Sometimes referred to as Fibre Broadband) service using the BT Openreach modem, which is commonly supplied with current BT FTTC installations.

How do I set up a DrayTek router with FTTC?

Setting up a DrayTek router with FTTC using the BT Openreach modem DrayTek routers with Ethernet WAN interfaces are able to connect to a BT Infinity or other ISPs similar BT FTTC based broadband (Sometimes referred to as Fibre Broadband) service using the BT Openreach modem, which is commonly supplied with current BT FTTC installations.

Do I need a password to connect to BT Infinity?

It is not BT who require a password but your router, with many third party routers the firmware requires a password to be entered to set up the connection. You can put anything you want into the password field and it’ll work. Re: Router settings for DrayTek 2862 LN for use with BT Infinity?

How do I contact DrayTek customer service?

Call us: 0345 5570007 Login I. Product Setup Guides Setting up a DrayTek router with FTTC using the BT Openreach modem Products: Vigor 2620Ln Vigor 2760 Vigor 2762