What is G13 fluorescent tube?
Fluorescent G13 tube base types are a two pin fitting located at each of the tube with 13mm between the two pins. The T8 (26mm diameter) and T12 (38mm diameter) uses the G13 cap fitting. G13 tube fittings are commonly used in kitchens, garages, and office buildings.
Table of Contents
What is G13 fluorescent tube?
Fluorescent G13 tube base types are a two pin fitting located at each of the tube with 13mm between the two pins. The T8 (26mm diameter) and T12 (38mm diameter) uses the G13 cap fitting. G13 tube fittings are commonly used in kitchens, garages, and office buildings.
What lengths do fluorescent tubes come in?
Common tube ratings
Tube diameter in 1⁄8 in (3.175 mm) | Nominal length | Nominal power (W) |
---|---|---|
T8 | 6 ft (1,829 mm) | 70 |
T12 | 14–14.5 in (356–368 mm) | 14,15 |
T12 | 16.5 in (419 mm) | 15 |
T12 | 2 ft (610 mm) | 20 |
What is T8 fluorescent tubes?
The largest category of tube light in widely-available use, T8 tube lights measure 26mm in diameter and are often used for lighting large, wide-open spaces. They’re normally seen in supermarkets, warehouses, garages and offices, although they’re suitable for smaller environments that need plenty of light too.
Is G13 the same as T12?
T12 38mm (G13) Fluorescent Tubes The largest size T12 (38mm) is no longer being manufactured, however, they did use the same G13 cap as the T8 fluorescent tube which means that you can replace the T12 tubes with the more efficient T8 of the same length.
Is G13 the same as T8?
A T8 tube is also called a TL-D tube from Philips and a Lumilux tube from Osram. You can recognize a T8 tube from it’s 28mm diameter. The socket is called G13 this because the 2 pins are 13mm apart from each other. . A T8 tube can work on an electronical ballast using a fixture without a starter.
How do I order fluorescent tubes?
First, you will need the diameter or how wide it is around. This is expressed as a number such as T8 or T12. The “T” stands for tubular, and the number is a measurement of the diameter in 1/8″ increments. So a bulb with a 1″ diameter would be a T8—eight 1/8″ increments.
Are T12 bulbs being phased out?
In effect since July 2012, the legislation eliminates nearly all 4-foot T12 lamps, some 4-foot T8 lamps, most 8-foot T12 lamps, and almost all standard halogen PAR38, PAR30 and PAR20 lamps from the market. T12 technology is over 80 years old. Since that time, lamps and bulbs have been developed that just work better.