What is ICOM ic-706mk2g?

I Z33T home pageI Z33T web pages in englishI ICOM IC-706mk2g is very popular transceiver among radio amateurs. Its popularity is due to its relatively low price and ability to work on all amateurs bands (HF, 6m, 2m and 70cm bands) This all-mode transceiver provide 100 watts on HF and 6 meters and 50 watts on 2 meters plus 20 watts on 435 MHz.

Is there a mod for ICOM ic-706 that works?

I have an Icom IC-706 and did the mod. I did this mod and it works great!!!! levels (jumps around alot due to saturating IF when signals are not there!!) instead of green). Leaving it on green is just driving the IF into saturation,

How to remove the cover of ic-706 Mk II G?

It is for IC-706 mk II g – European version. Procedure: Place the device on the table with face toward you. Unscrew the screws that hold the cover and gently lift it off. Be careful because the loudspeaker cable is quite short.

Does the intermod mod affect HF or 6m?

listen to FM broadcast in the 88-108Mhz area. Q:Does this mod affect HF or 6m? A:The mod affects only frequencies above 60 MHz. If you just cut or remove the yellow wire, the 2m bandpass filter is used all the time. drowned in intermod from the FM BC band. small; therefore I did some tests and came to the following two modifications.