A thick solid white line at a stop sign means stop before the line. Intermittent vertical thick white lines designate crosswalk areas that are not accompanied by a stop sign or a normal traffic-light system. Drivers must stop when pedestrians intend to cross at these locations.

What do thick white lines on road mean?

A thick solid white line at a stop sign means stop before the line. Intermittent vertical thick white lines designate crosswalk areas that are not accompanied by a stop sign or a normal traffic-light system. Drivers must stop when pedestrians intend to cross at these locations.

What does a solid road line indicate?

The solid line means that crossing the line marking is discouraged. You should only change lane when it is necessary to avoid an incident. The solid white lane line marking is often used to separate a through lane from an added mandatory turn lane at intersections.

What is the white line on a road called?

White lane markings are the most common. Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes.

What is the solid white line on the side of the road called?

The solid white line on the right side is called the ‘fog line’ used to help cars stay in their lane during foggy conditions and help pedestrians stay off the road.

What is the purpose of white edge lines?

White Lines: delineate the separation of traffic flows in the same direction, or mark the right edge of the pavement.

What does continuous white line mean?

Vehicles may cross the line for a short time. Vehicles may park during daylight hours only. Vehicles may not cross or straddle the line. Vehicles may perform a U-turn.

What are the types of road marking?

7 Types of Road Markings as per IRC-35

  • Longitudinal Markings.
  • Transverse Markings.
  • Hazard Marking.
  • Block Marking.
  • Arrow Marking.
  • Directional Marking.
  • Facility Marking.

What are the white squares painted on roads?

They are used by traffic police to accurately assess one’s speed. Since the formula for speed is speed = time x distance, an officer starts a stopwatch when you travel over the first square and stops it as you go over the second.

What are the lines on the side of the road called?

Rumble strips (also known as sleeper lines or alert strips) are a road safety feature to alert inattentive drivers of potential danger, by causing a tactile vibration and audible rumbling transmitted through the wheels into the vehicle interior.

What is the difference between a solid white line and a solid yellow line?

Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. Yellow lines show you where traffic is going in different directions.

What does a solid white line at the side of the road UK?

Explanation: The continuous white line shows the edge of the carriageway. It can be especially useful when visibility is restricted, such as at night or in bad weather.

What is meant by a solid white line in the Centre of the road?

WHITE LINES painted on the pavement indicate traffic traveling in your direction. Broken White Line: you may change lanes if it is safe to do so. Solid White Line: requires you to stay within the lane and also marks the shoulder of the roadway.