Both oils have lower viscosity at temperatures which measure the resistance of the oil to flow. However, 5w30 is much thinner compared to 10w30. 5w30 engine oils will, therefore, be able to protect the inner components of the engine faster than the 10w30 due to its low viscosity.

What can I use instead of 10W-30 oil?

Both oils have lower viscosity at temperatures which measure the resistance of the oil to flow. However, 5w30 is much thinner compared to 10w30. 5w30 engine oils will, therefore, be able to protect the inner components of the engine faster than the 10w30 due to its low viscosity.

Is 10W30 better than 10W40?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Is SAE 30 the same as 10W30?

SAE 30 vs 10W30 – Are they the Same? The short answer to this is no, 10W-30 oil is not the same as SAE 30. The difference between 10W30 multi – grade and straight grade oil is that it has been formulated to provide a 10W viscosity at very low temperatures to aid in cold-cranking in heavy engines.

What does 10w30 stand for?

The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold, and 30 when the engine is hot. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.

What does the W stand for in oil?

WINTER
The short answer:The numbers represent the viscosity of the oil and the W stands for WINTER. The long answer:The Society of Automotive Engineers (SAE) has established a numerical code system for grading motor oils according to their viscosity characteristics.

What is the difference between 5 30 and 10 30 motor oil?

The main difference between 5w30 and 10w30 is that 5w30 is less viscous and more efficient than 10w30 because the fuel is thinner and can reach the difficult part of the engine. 5w30 is a viscosity engine oil that is used for engine lubrication.

What oil can I use instead of SAE 30?

Can I Use 5W-30 Instead Of SAE 30? Both oils have a “30” hot viscosity rating. This means SAE 5W-30 oil has the same flow rate as SAE 30 at operating temp. So, technically it’s fine to use SAE 5W-30 oil in place of SAE 30.

What is SAE 10 oil?

The SAE 10 Oil category represents lubricants that have a viscosity grade of SAE (Society of Automotive Engineers) 10. This grading system tells you the thickness of the oil and how it is affected by temperature. In this case, the “10” represents the thickness of the oil at operating temperature.

What does 10w30 mean?

How often should I really change my oil?

On average, vehicles are estimated to need an oil change every 3,000 miles or every six months. This can vary based on your driving habits, your driving frequency, the age of your vehicle, and the quality of the oil you use. If you drive a newer vehicle, you might be able to safely wait a little longer between changes.