How do I reset my Cinemate 1sr?
Reset your product by following these steps:
Table of Contents
How do I reset my Cinemate 1sr?
Reset your product by following these steps:
- Turn the product off.
- Unplug the speaker array power cord from the power outlet.
- Unplug the Acoustimass Module power cord from the power outlet.
- Wait 30 seconds.
- Reconnect the power cords.
Why won’t my Bose Cinemate turn on?
Try new batteries in the remote. In case the battery or batteries in your remote are low or have no power, replace them. Alkaline batteries are recommended over rechargeable batteries, which might output lower voltage.
Does Bose Cinemate 1 SR have Bluetooth?
(The Bose WB-135 Wall Mount Kit is sold separately.) The Bluetooth-enabled subwoofer is paired with the array at the factory and is meant for placement within 30 feet. The only thing to plug in is the power cord….Bose® CineMate® 1 SR Home Theater Speaker System.
| Soundbar Inputs | Optical and coaxial digital; stereo |
|---|---|
| Weight | Acoustimass Module: 13.8 lb |
Why is my Bose Soundbar blinking green?
Was this article helpful?…Power, Volume and Error status.
| Status Light | System State |
|---|---|
| Glows solid green | Power on |
| Blinks green | Audio muted |
| Glows dim amber | Standby, auto-wake enabled |
| Glows solid amber | Dialogue mode |
How do I reset my Bose Cinemate?
Reset your product by following these steps:
- Turn the product off.
- Unplug the power cord from the power outlet.
- Disconnect the Interface Module from the Acoustimass Module. Wait 30 seconds.
- Reconnect the Interface Module.
- Reconnect the power cord.
- Retest the system.
How do you turn on a Bose Acoustimass module?
Insert the small connector end of the power cord into the AC input connector on the Acoustimass module (Figure 13). 2. Insert the large end of the cord into an AC power (mains) outlet. Note: On 220-240V models only, turn the Acoustimass® module POWER switch to on (l).
How do I reset my Bose Cinemate Sr remote?
Reset the universal remote.
- On the remote control, press and hold a source button (i.e., TV or CBL-SAT) until all six source buttons glow, then release. The button that was held remains glowing.
- On the number keypad, enter 981. The source buttons flash to confirm.
- Reprogram the remote.
How do I reset my Bose sound bar?
To reset a Bose soundbar, turn the soundbar on and simultaneously hold down the ‘Power’ and ‘Skip Forward’ buttons for five seconds. You will see a flashing white light that blackens and the system will then reboot. When the reset is done, the indicator light will display an amber color.
Why is my Bose speaker blinking?
No, the BlueTooth indicator will either blink blue or white. A blinking blue light means the speaker is ready to connect. A white blinking light tells you the speaker is currently trying to connect via BlueTooth.
